Polyvine Heavy Duty Wood Varnish (Sealing Wood Surfaces)

$25.00

1 in stock

Description

Polyvine Heavy Duty Wood Varnish- Dead Flat Finish 500 ml pint 

I wanted a product that could be used to seal wood surfaces that will also be compatible with paint and not “amber” them if I’m painting with a white.  As a sign maker and furniture artist, it’s important to have products that can work together.  This product will also be great for when you sand down a table and just want to seal it and not stain it.  This is also the product I recommend you use to topcoat you use if you stain your surface with a polyvine wood dye.

 

Product Description

ultra tough, crystal clear protection for interior surfaces that dries fast and cures fast
An ultra hard, high quality coating with a satin finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. Formulated for working surfaces and areas of high wear.
When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Heavy Duty Wood Varnish Satin Finish followed by one or two coats of Hard Wearing Wood Varnish Dead Flat Finish.

ideal for
• hardwood and softwood • doors • kitchen worktops • bar tops • tabletops • counters • bookshelves • kitchen cabinets • wood panelling

unique qualities
• dries fast cures fast • highly heat and water resistant • ultra hard • very clear • good resistance to alcohol, stains and chemicals • sands to a high-grade finish • easy to apply • wash brushes in water

preparation
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.

application
Ensure the product is well mixed. Apply 3 thin coats of varnish and brush out well. Too thick a coating, or pooling in crevices, will dry with a white haze.
On new wood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain that may have occurred.
When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Heavy Duty Wood Varnish Satin Finish followed by one or two coats of Hard Wearing Wood Varnish Dead Flat Finish.

caution
Always apply to a test area before starting work. Appearance may vary according to the color and type of wood and the number of coats. Do not apply over uncured oil based paint.

drying time: 30-60 minutes
recoat time: 1-2 hours
curing time: 16 hours
coverage: 10-20 square metres per litre (107-215 square feet)

Additional information

polyvine

Dead Flat, Satin