Description

Polyvine White Wash Satin Wax Finish Varnish -500 ml Pint 

I have been looking for a product that I could use to seal Milk paint that could give it the soft feel of wax but not disturb the paint like the process of waxing and one that would work with all paint colors.  Polyvine’s Wax Finish Varnish is the perfect option.  When you have a super chippy milk painted surface, you want to seal it with a poly so that it does not continue to flake off.  Using this product will reduce the risk of further chipping compared to top-coating with hemp oil or disturbing the paint more with traditional waxes. You just need to make sure to put this water based poly down in thin layers so that hazing does not occur which can happen if you put it down too thick.

Product Description

high performance acrylic varnish protects interior woodwork with a traditional wax-like finish

Combines the durability of a varnish with the silky feel of wax, reminiscent of the traditional feel of lovingly preserved furniture. Protects all timber surfaces with a highly durable, water and heat resistant film.
Clear Wax Finish Varnish will protect and enhance a wide range of surfaces where a traditional finish is required.
Colored Wax Finish Varnish transforms wood, producing subtle, even shades, previously only obtainable by a master craftsman.

ideal for
• wood and MDF • new wood furniture • bookshelves • fire surrounds • kitchen cabinets • staircases • doors

unique qualities
• heat and water resistant • highly durable • silky wax feel • easy to apply in one coat • wash brushes in water

preparation
All surfaces must be clean and free from dust, dirt, oil and contamination.

application
On new wood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain that may have occurred. If a very high level of durability and stain resistance is required, apply one or two coats of clear satin wax finish varnish and one or two coats of clear dead flat wax finish varnish.  This product is to be brushed or sprayed.  It is not to be rolled. 

caution
Always apply to a test area before starting work.
Too thick a coating, or pooling in crevices, will dry with a white haze.
Appearance may vary according to the color and type of wood and the number of coats.
Protect the finish from water and steam for five days after application.

drying time: 1-2 hours
recoat time: 4 hours
coverage: 15 square metres per litre

Additional information

polyvine

Dead Flat, Dead Flat Quart, Satin, Satin Quart